Investigating the command-loading failures in Antigravity revealed a structural bug introduced in commit 27c18e0. The ConfigDrivenIdeSetup class resolves template names by appending an artifact type suffix to the platform’s template_type, expecting specific files like antigravity-workflow.md or antigravity-agent.md.
Previously, only a generic antigravity.md was provided, causing the loadTemplate() fallback mechanism to silently use default-*.md templates. These default templates inject standard YAML frontmatter (name and quoted description) which Antigravity rejects.
Changes:
- Replaced generic antigravity.md with specific artifact-typed templates (antigravity-agent.md, antigravity-workflow.md, etc.)
- Removed redundant 'name' field from Antigravity templates
- Removed wrapping single quotes from 'description' field to satisfy Antigravity requirements
* fix(installer): refuse install when ancestor dir has BMAD commands
Claude Code inherits slash commands from parent directories, so
installing into a nested project when a parent already has .claude/commands
with bmad-* files causes duplicate entries in the autocomplete.
Add ancestor_conflict_check flag (enabled for claude-code) that walks
up the directory tree before install. If BMAD files are found in an
ancestor target_dir, the installer refuses with an actionable error.
Also fix IdeManager.setup() to propagate handler success status instead
of unconditionally returning success: true.
* Address code review feedback from CodeRabbit and Augment
- Move "Setting up..." log after conflict check so it only shows when
install will proceed
- Fix rm command: add -rf flags and correct quoting for glob outside quotes
- Improve error wording: "ancestor installation" instead of misleading
"ancestor directory"
- Use case-insensitive startsWith for bmad file detection (macOS/Windows)
- Document ancestor_conflict_check in the installer config schema
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix(installer): resolve symlinks before ancestor conflict walk
Use fs.realpath() instead of path.resolve() so the ancestor directory
walk follows the physical filesystem path, not the logical symlink path.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* fix(opencode): use mode: all in agent template, remove name frontmatter, fix directory names
- Replace name: '{{name}}' with mode: all in opencode-agent.md
mode: all enables both Tab-key agent switching in the TUI and @subagent
invocation via the Task tool (mode: primary blocked subagent use)
- Remove name: '{{name}}' from opencode-task/tool/workflow/workflow-yaml templates
OpenCode derives command name from filename, not from a name frontmatter field;
the bare {{name}} value was overriding the bmad- prefixed filename causing
name collisions with built-in OpenCode commands (fixes#1762)
- Fix deprecated singular directory names in platform-codes.yaml:
.opencode/agent -> .opencode/agents, .opencode/command -> .opencode/commands
- Add legacy_targets migration: cleanup() now removes stale bmad-* files from
old singular directories on reinstall so existing users don't get duplicates
- Fix removeEmptyParents to continue walking up to parent when starting dir is
already absent instead of breaking early
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(opencode): address code review findings for cleanup and schema docs
- Add project boundary guard to removeEmptyParents() using path.resolve
and startsWith check to prevent traversal outside projectDir (Augment)
- Fix JSDoc: "Recursively remove" -> "Walk up ancestor directories"
- Add user-visible migration log message when processing legacy_targets
- Document legacy_targets field in Installer Config Schema comment block
in platform-codes.yaml (CodeRabbit + Augment)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(opencode): improve removeEmptyParents error handling and loop clarity
- Distinguish recoverable errors (ENOTEMPTY, ENOENT) from fatal errors in
removeEmptyParents() catch block — skip level and continue upward on
TOCTOU races or concurrent removal, break only on fatal errors (EACCES)
- Add comment clarifying loop invariant for missing-path continue branch
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Co-authored-by: Brian <bmadcode@gmail.com>
* fix(installer): remove double-escaping of quotes in CSV manifest pipeline
cleanForCSV() pre-escaped " to "" before storing in memory, then
escapeCsv() escaped again at CSV write time. After csv-parse round-trip
(which only un-escapes once), descriptions retained doubled quotes
instead of originals, corrupting generated output files.
Fix: remove the redundant quote escaping from cleanForCSV() since
escapeCsv() already handles CSV quoting correctly at write time.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix(installer): use single quotes for description in Gemini workflow templates
Replace triple-quoted """{{description}}""" with single-quoted '{{description}}'
to avoid TOML escaping issues in Gemini workflow templates.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
This change removes the disable-model-invocation flag from all IDE installer
templates. By allowing model invocation, bmad help can now properly invoke
suggested workflows as direct skill calls, improving the user experience by
enabling automatic workflow execution when desired.
* feat: migrate Codex installer from .codex/prompts to .agents/skills format
Switch CodexSetup to write BMAD artifacts as Agent Skills (agentskills.io
format) in .agents/skills/<name>/SKILL.md instead of flat files in
.codex/prompts. Remove global/project location prompt. Add legacy cleanup
of old .codex/prompts directories during install and uninstall.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* ignore .agents for codex
* fix: normalize line endings and use platform-native EOL in SKILL.md output
Normalize all content to LF in transformToSkillFormat, then convert to
os.EOL (CRLF on Windows, LF on Linux/macOS) before writing SKILL.md
files in both writeSkillArtifacts and installCustomAgentLauncher.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* ignore .agents directory
* use description from metadata in custom agent launcher
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Add CodeBuddy (Tencent Cloud Code Assistant) as a supported IDE platform:
- Add platform config to tools/platform-codes.yaml
- Add installer config to tools/cli/installers/lib/ide/platform-codes.yaml
- Add .codebuddy to .gitignore
CodeBuddy uses the default template type with target directory .codebuddy/commands
Co-authored-by: wison <wisonlin@tencent.com>
Co-authored-by: Brian <bmadcode@gmail.com>
* fix(installer): add custom Rovo Dev installer with prompts.yml generation
Rovo Dev CLI requires a .rovodev/prompts.yml manifest to register prompts
for /prompts access. The config-driven installer was writing .md files but
never generating this manifest, so /prompts showed nothing.
- Create custom rovodev.js installer extending BaseIdeSetup
- Generate prompts.yml indexing all written workflow files
- Merge with existing user entries (only touch bmad- prefixed entries)
- Remove stale rovo entry from tools/platform-codes.yaml
Closes#1466
* fix(installer): prefix prompts.yml descriptions with entry name
The /prompts list in Rovo Dev only shows descriptions, making it hard
to identify entries. Prefix each description with the bmad entry name
so users see e.g. "bmad-bmm-create-prd - PRD workflow..." instead of
just the description text.
* refactor(installer): address review findings in Rovo Dev installer
- Hoist toDashPath import to module top level
- Extract _collectPromptEntries helper replacing 3 duplicated loops
- Remove unused detectionPaths (detect() is overridden)
- Guard generatePromptsYml when writtenFiles is empty
- Align cleanup() with detect() predicate (remove any bmad-*, not just .md)
- Use BaseIdeSetup abstractions (this.pathExists/readFile/writeFile) in cleanup()
- Update loadHandlers() JSDoc to include rovodev.js
---------
Co-authored-by: Brian <bmadcode@gmail.com>
Windsurf is no longer a preferred IDE. Only Claude Code and Cursor
are now recommended. Windsurf remains a supported platform (installer
still works, templates stay, reference tables stay).
- Set preferred: false in both platform-codes.yaml files
- Move windsurf entry to "Other IDEs" section in tools/platform-codes.yaml
- Fix codex.js hardcoding preferred: true in constructor
- Remove stale "3 preferred tools" count from ui.js JSDoc
- Update docs to list only Claude Code and Cursor as recommended
- Update docs/index.md popular tools to Claude Code, Cursor, Codex CLI
- Update README to reflect V6 stable release and platform positioning
- Emphasize BMad Method as a module within the Module Ecosystem
- Simplify quick start and module sections
- Add Discord, GitHub, and YouTube links to installer next steps
* fix custom install bug
* fix manager.js
* From PR #1624: added empty module.yaml handling (skip + warn) and removed paths from the config to match promptCustomContentSource()
* fix: custom-content quick-update ENOENT, pass --custom-content through, add PR#1624 improvements to allow update installs to work using non-interactive mode
- Move "Module configuration complete" to appear after all customization
prompts finish, not just after defaults are applied
- Change spinner stop message to "Module defaults applied" for clarity
when customization follows; keep "Module configuration complete" for
express mode where no customization prompts follow
- Remove extra blank line before post-install notes
- Wrap spinner loop in try/finally for error safety
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* feat(cli): add uninstall command with selective component removal
Add `bmad uninstall` CLI command for clean removal of BMAD installations.
Interactive mode with directory router and component multiselect; non-interactive
`--yes` flag preserves user artifacts by default. Three-phase spinner UX,
manifest-scoped IDE cleanup, GitHub Copilot marker stripping, recursive empty
directory cleanup, and chalk-to-clack migration in copilot handler.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix(cli): address code review findings for uninstall command
- Add path traversal guard in uninstallOutputFolder (resolve + startsWith)
- Thread silent flag through to cleanupCopilotInstructions
- Trim text input before path.resolve in directory prompt
- DRY uninstall() by delegating to extracted helper methods
- Validate projectDir existence before probing for BMAD
- Use fs.rmdir instead of fs.remove in removeEmptyParents (race safety)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat(cli): add destructive action warning and confirm before uninstall
Move warning box after component selection and add a confirmation prompt
defaulting to No, so users see the irreversibility warning right before
the point of no return. Non-interactive --yes mode skips both.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: Brian <bmadcode@gmail.com>
* feat: tea automation prereq prompts
* fix: addressed PR comments
* docs: added docs on how to set the post install output in the module
* addressed PR request from Brian
Remove hallucinated mode: primary from opencode-agent template - OpenCode
defaults to mode: all and mode: primary does not enable Tab-switching as
the original PR #1556 claimed. Restore the name frontmatter field across
all OpenCode templates to match the standard pattern used by other IDEs.
* fix: remove duplicate 'recompilation complete' message in compile-agents output
The spinner.stop() in compileAgents() already displays this message,
so the additional log.success() call produced a redundant line.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: remove deselected IDE configurations during installer update
When updating an existing installation, IDEs that were previously
configured but unchecked in the new selection are now detected and
cleaned up after user confirmation, mirroring the existing module
removal flow.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* chore: remove unreachable return statements after process.exit calls
Remove 4 dead `return;` statements that immediately follow `process.exit(0)`
calls in install.js. Since process.exit() terminates the process, the
subsequent return statements are unreachable.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: batch directory creation log messages for cleaner installer output
Collect all created directory names during module directory setup and
emit them as a single log message instead of one per directory. This
eliminates the excessive blank-line spacing that @clack/prompts adds
between individual log.message() calls.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: consolidate directory creation output across all modules
Move directory creation logging from ModuleManager.createModuleDirectories
into the installer caller. The method now returns created directory info
instead of logging directly, allowing the installer to batch all module
directories into a single log message under one spinner. Also adds spacing
before the final "Installation complete" status line.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: propagate skipPrompts flag to IDE collectConfiguration calls
The --yes flag (skipPrompts) was not being passed through to IDE handler
collectConfiguration() calls, causing the Codex installer to hang on its
interactive prompt in non-interactive mode (CI/CD, --yes flag).
- Add skipPrompts parameter to collectToolConfigurations() and forward it
to handler.collectConfiguration() options
- Add early return in CodexSetup.collectConfiguration() when skipPrompts
is true, defaulting to global install location
- Guard IDE removal confirmation prompt with skipPrompts check, defaulting
to preserve existing configs (consistent with prompt default: false)
Fixes#1610
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: address code review findings from PR #1612
- Restore saved IDE configurations when removal is cancelled or skipped
in non-interactive mode, preventing silent config downgrade (e.g.,
Codex 'project' install reverting to 'global')
- Short-circuit IDE removal block when skipPrompts is true to eliminate
unnecessary warning/cancelled log output in --yes mode
- Add null guard on config.ides before pushing re-added IDEs
- Return empty result object from createModuleDirectories early exits
instead of undefined for a uniform return contract
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: guard remaining unguarded prompts with skipPrompts for non-interactive mode
Add skipPrompts guards to 4 remaining unguarded interactive prompts in
installer.js that caused hangs in non-interactive mode (--yes flag):
- Module removal confirmation: preserves modules by default
- Update action selection: defaults to 'update'
- Custom module missing sources: keeps all modules
- Custom module delete confirmation: unreachable via early return
Additional robustness fixes:
- Defensive type-check before .trim() on prompt result (symbol guard)
- Console.log suppression scoped per-IDE instead of global try/finally
- process.exit flush via setImmediate for legacy v4 exit path
- JSDoc updated for new skipPrompts parameter
Follows established pattern from commit f967fdde (IDE skipPrompts guards).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: migrate installer console.warn/error calls to prompts.log API
Replace all user-facing console.warn(), console.error(), and console.log()
calls with their prompts.log.* equivalents for consistent @clack/prompts
styled output across the installer codebase.
- Migrate 13 console.warn/error calls across 5 files to prompts.log.*
- Convert moduleLogger callbacks to async prompts.log.* in installer.js
- Replace blank-line console.log() with prompts.log.message('')
- Add prompts import to 5 files that lacked it
- Remove redundant "Warning:" prefixes (prompts.log.warn adds styling)
- Remove redundant local prompts require in installer.js L454
- Add missing await on logger.log call in manager.js
- Debug-gated console.log calls in manifest-generator.js left as-is
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: replace installer spinner with tasks() progress and consolidate summary
Replace the serial spinner during non-interactive install phases with
@clack/prompts tasks() component for clearer progress visibility. The
install flow now uses two tasks() blocks (pre-IDE and post-IDE) with
the IDE setup retaining its own spinner since it may prompt.
- Refactor install phases into tasks() callbacks with message() updates
- Merge next-steps content into the "BMAD is ready to use!" summary note
- Fix spinner.stop() tense: "Reviewing..." → past tense ("reviewed")
- Move directory creation output after tasks() to avoid breaking progress
- Remove dead showInstallSummary() from ui.js
- Harden error handling: try/finally on IDE spinner, safe catch block
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: consolidate install messages into single start banner
Combine start and end marketing messages into one banner shown before
installation begins. Remove the post-install end message and its
displayEndMessage() calls — the install summary note now serves as
the final output.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* style: apply prettier formatting to install command files
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: rename "Module installers" label to "Module directories" in summary
The old script-based module installer pattern was replaced with
declarative directory creation, but the task title and summary label
were never updated to reflect that change.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: add batch module configuration gateway with express/customize modes
Replace N individual "Accept Defaults?" confirm prompts with a single
select gateway ("Express Setup" vs "Customize"). When customizing, a
multiselect shows only modules with configurable options. All others
silently receive defaults via spinner progress.
- Add scanModuleSchemas() to pre-scan module metadata and display names
- Add select/multiselect gateway in collectAllConfigurations()
- Replace per-module confirm with modulesToCustomize Set check
- Suppress UI output during silent default config via _silentConfig flag
- Reorder installer tasks: module dirs before config generation
- Add resolution null guards for edge-case safety
- Cache ModuleManager instance via _getModuleManager() for reuse
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: move module directories instead of creating new ones on path change
When users modify a module's directory path during installer update/modify,
the old directory is now moved to the new location instead of creating an
empty directory while leaving the old one (with its documents) behind.
Includes: cross-device fs.move, error handling with fallback, path
normalization, parent/child path guard, and warning when both dirs exist.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: add --yes flag guards to all unguarded prompts in update/modify path
Guard 5 interactive prompts in ui.js that caused the installer to hang
when --yes flag was used with existing installations. Add skipPrompts
field to 3 return objects that were missing it, ensuring installer.js
downstream guards work correctly for all update paths.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* feat: add custom GitHub Copilot installer handler
Adds a dedicated GitHub Copilot handler that generates:
- Agent files with .agent.md extension and enriched descriptions
- Prompt files (.prompt.md) for workflows, tasks, and agent activators
- copilot-instructions.md with project config and agent reference table
Replaces the generic config-driven handler with a custom one that
properly supports Copilot's agent/prompt file conventions.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: escape YAML descriptions and preserve user copilot-instructions
- Escape single quotes in YAML frontmatter descriptions across all prompt
generators (createWorkflowPromptContent, createTechWriterPromptContent,
createAgentActivatorPromptContent) to match createAgentContent behavior
- Make copilot-instructions.md non-destructive using BMAD markers
(<!-- BMAD:START --> / <!-- BMAD:END -->) to preserve user content
- On cleanup, only remove content between markers; skip files without markers
- Back up existing unmarked files before overwriting
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: add error handling for CSV read/parse in loadAgentManifest and loadBmadHelp
Wrap file read and csv.parse in try/catch blocks so malformed or
unreadable CSV files gracefully degrade instead of aborting setup.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: use specific detection paths instead of .github configDir
Set configDir to null and use detectionPaths with
.github/copilot-instructions.md and .github/agents/ so the base
detect() doesn't false-positive on every GitHub repo.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* docs: add comments explaining hardcoded bmm/config.yaml in prompts
Clarify that bmm/config.yaml is safe to hardcode in generated prompt
content because these prompts are only created when bmm module data
(bmad-help.csv, agent artifacts) exists.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: guard against missing workflow-file in bmad-help.csv entries
Skip entries where workflow-file is empty/undefined to prevent
workflowFile.endsWith() from throwing during prompt generation.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: guard escapeYamlSingleQuote against undefined input
Default to empty string when value is undefined/null to prevent
replaceAll from throwing on missing CSV fields.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: preserve customised tool permissions across reinstalls
Before this change, reinstalling would overwrite any user-customised
tools arrays in agent and prompt frontmatter with the hardcoded default.
Now the installer reads existing tool permissions from .agent.md and
.prompt.md files before cleanup, and re-applies them to the regenerated
files. Falls back to the default ['read', 'edit', 'search', 'execute']
for new files or files without prior customisation.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: prevent cleanup from stripping copilot-instructions.md markers before generation
The cleanup() method was removing the BMAD marker section from
copilot-instructions.md, leaving user content without markers.
generateCopilotInstructions() then treated the markerless file as
legacy, backed it up, and overwrote user content.
Fix: remove the copilot-instructions.md block from cleanup() entirely.
generateCopilotInstructions() already handles marker-based replacement
in a single read-modify-write pass that correctly preserves user content.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* docs: update manager.js comments to include github-copilot.js
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: make agent capabilities data-driven via agent YAML metadata
Replace the hardcoded getAgentCapabilities() map with a data-driven
pipeline. Capabilities are now defined in each .agent.yaml source file,
compiled into the XML output, extracted into agent-manifest.csv by the
manifest generator, and read by the GitHub Copilot handler at install
time. New agents automatically get their capabilities without code
changes.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: use this.bmadFolderName instead of hardcoded _bmad in template paths
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Removes the security-risky _module-installer pattern (code execution at
install time) in favor of a declarative `directories` key in module.yaml.
The main installer now handles directory creation centrally based on this
config, eliminating per-module installer.js scripts and their CJS/ESM issues.
Changes:
- Delete src/bmm/_module-installer/installer.js
- Delete src/core/_module-installer/installer.js
- Add `directories` key to src/bmm/module.yaml
- Rename runModuleInstaller() -> createModuleDirectories()
- Remove _module-installer from ESLint overrides
- Remove _module-installer from file-ref validator skip dirs
* fix: remove redundant "None" skip option from module selection
The "None - Skip module installation" option was unnecessary since
core is always locked/selected, satisfying the required constraint.
Users can simply press Enter with only core selected to skip modules.
Also removes dead code: selectModules(), getExternalModuleChoices(),
and selectExternalModules() methods that were never called.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: support ESM and .cjs module installers in ModuleManager
Module installer loading now handles three cases:
- .cjs files loaded via require() (always CommonJS regardless of package type)
- .js files loaded via dynamic import() (works for both CJS and ESM)
- CJS default export unwrapped automatically for consistent API
This fixes errors when external modules set "type":"module" in their
package.json. Those modules must still rename installer.js to
installer.cjs if it uses require() internally.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: address code review findings from PR #1590
- Filter 'core' from CLI --modules in update path for consistency
- Update selectAllModules() JSDoc to reflect core exclusion
- Fix ESM default-export unwrap to handle function/class exports
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: clarify module post-install script errors as non-fatal warnings
Change error display from log.error to log.warn and explain that the
module was installed successfully — only the optional post-install
script could not run. Prevents users from thinking the module
installation itself failed.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: suppress non-fatal module post-install script errors
Post-install scripts fail due to CJS/ESM incompatibility but module
files are already copied successfully. Silently catch the error instead
of showing a warning that alarms users into thinking installation failed.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: remove redundant modules and tools lines from install summary
The checkmark list already shows each installed module and IDE tool.
Keep only the install path and file-warning lines in the summary footer.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: Brian <bmadcode@gmail.com>
* feat(cli): complete @clack/prompts migration
Full migration of BMAD CLI installer from legacy terminal libraries
(chalk, ora, boxen, figlet, wrap-ansi, cli-table3, readline) to unified
@clack/prompts v1.0.0 visual system.
Foundation (prompts.js + cli-utils.js):
- Extended prompts.js wrapper with box, spinner, progress, taskLog,
path, autocomplete, selectKey, stream, color re-export
- Refactored cli-utils.js: displayLogo uses box(), sections use note(),
steps use log.step(), removed boxen/figlet/wrap-ansi/cli-table3
UI orchestration (ui.js):
- Replaced ~100 console.log+chalk calls with log.*, note(), box()
- Replaced ora spinner with @clack spinner
- Module selection: autocompleteMultiselect with locked core module,
bulleted post-selection display, maxItems for no-scroll
Spinner migration (installer.js):
- Replaced 40+ ora spinner calls with @clack spinner
- All spinner.stop() calls include meaningful messages
- Failure paths use spinner.error() (red cross) instead of stop()
Readline migration (agent/installer.js + config-collector.js):
- Migrated readline prompts to @clack text/confirm/select
- Fixed chalk.dim bug (chalk was never imported)
- Removed chalk from config-collector.js
IDE handlers + modules (7 files):
- Replaced chalk+ora across all IDE handlers and module manager
- Fixed options.installer undefined bug in manager.js update()
Cleanup:
- Removed ora, boxen, figlet, wrap-ansi, cli-table3 from dependencies
- chalk stays (used outside tools/cli/ scope)
- Replaced hand-drawn Unicode update box in bmad-cli.js with box()
- Added process.stdin.setMaxListeners(25) for sequential prompts
Spinner wrapper adds isSpinning state tracking (not native to @clack).
Removed dead groupMultiselect and sortKey sort calls.
Ref: tech-spec-installer-clack-migration-ui-enhancement.md
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat(cli): consolidate installer output to single spinner + summary
Replace ~40 lines of output from 15+ spinner start/stop cycles with a
single animated spinner during installation and a final note() summary
block showing checkmarks per step.
Key changes:
- Add results collector pattern in install() method
- Replace spinner.stop/start pairs with addResult + spinner.message
- Add renderInstallSummary() using prompts.note() with colored output
- Propagate silent flag through IDE handlers and module manager
- Add spinner race condition guards (start while spinning, stop while stopped)
- Add no-op spinner pattern for silent external module cloning
- Fix stdin listener limit to be defensive with Math.max
- Add GIT_TERMINAL_PROMPT=0 for non-interactive git operations
- Merge locked values into initialValue for autocomplete prompts
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix(cli): resolve code review findings from @clack/prompts migration
Address 31 issues across 14 CLI files found during PR #1586 review
(Augment Code + CodeRabbit):
- Fix bmadDir ReferenceError by hoisting declaration before try block
- Wrap console.log monkey-patch in try/finally for safe restoration
- Fix transformWorkflowPath dead code and undefined return path
- Fix broken symlink crash in _config-driven.js and codex.js cleanup
- Pass installer instance through update() for agent recompilation
- Fix @clack/prompts API: defaultValue→default, initialValue→default
- Use nullish coalescing (??) instead of logical OR for falsy values
- Forward options in recursive promptToolSelection calls
- Remove no-op replaceAll('_bmad','_bmad') in manager and generator
- Remove unused confirm prompt in config-collector hasNoConfig branch
- Guard spinner.message() when spinner is not running
- Add missing methods to silent spinner stub (cancel, clear, isSpinning)
- Wrap install.js error handler with inner try/catch + console fallback
- Gate codex per-entry error log with silent flag
- Add return statements to all stream wrapper methods
- Remove dead variables (availableNames, hasCustomContentItems)
- Filter core module from update flow selection
- Replace borderColor ternary chain with object map
- Fix Kilo "agents" label to "modes" in IDE manager
- Normalize error return shape for unsupported IDEs
- Fix spinner message timing before dependency resolution
- Guard undefined moduleDir in dependency-resolver
- Fix workflowsInstalled counter inflation in custom handler
- Migrate console.warn calls to prompts.log.warn
- Replace console.log() with prompts.log.message('')
- Fix legacyBmadPath hardcoded to .bmad instead of entry.name
- Fix focusedValue never assigned breaking SPACE toggle and hints
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Update all references to the help task file from the old path
`_bmad/core/tasks/bmad-help.md` to the new path `_bmad/core/tasks/help.md`.
Affected files:
- 7 workflow step files across multiple workflows
- 1 IDE tool command generator (updated comments)
- Override _isActionKey to treat SPACE as an action key instead of search input,
and add key handler to toggle selections when not navigating
- update IDE selection prompt message from "Select tools:" to "Integrate with:".
* docs: add official external modules reference page
* chore: remove obsolete docs and basement files
* fix: update robots.txt URLs to docs.bmad-method.org
* fix: generate robots.txt dynamically from site base URL
Replace static robots.txt with an Astro endpoint that uses the
configured site URL, so sitemap references are correct on both
fork deployments and production.
* fix: unify site URL resolution in build-docs.js
build-docs.js had its own hardcoded fallback URL
(bmad-code-org.github.io) instead of using the shared
getSiteUrl() function, causing URL mismatches between
robots.txt, llms.txt, and sitemaps. Now all components
resolve the site URL through the same function. Renamed
site-url.js to .mjs to avoid Node ESM detection warnings.
* fix: correct module names and relocate prompt file
- CIS: "Creative Innovation Suite" → "Creative Intelligence Suite"
- GDS: "Game Dev Suite" → "Game Dev Studio"
- Move _prompt-external-modules-page.md from docs/ to tools/docs/
* refactor: convert build-docs to ESM, eliminate mutable globals
- Convert build-docs.js to build-docs.mjs (CJS → ESM)
- Import getSiteUrl directly, remove async import workaround
- Kill mutable SITE_URL global, call getSiteUrl() where needed
- Clean up Banner.astro variable naming
- Update package.json and CI workflow for .mjs extension
* feat: add non-interactive installation support
Add command-line flags to support non-interactive installation for CI/CD
pipelines and automated deployments:
- --directory: Installation directory
- --modules: Comma-separated module IDs
- --tools: Tool/IDE IDs (use "none" to skip)
- --custom-content: Custom module paths
- --action: Action type for existing installations
- --user-name, --communication-language, --document-output-language, --output-folder: Core config
- -y, --yes: Accept all defaults
When flags are provided, prompts are skipped. Missing values gracefully
fall back to interactive prompts.
* fix: complete non-interactive installation support
- Fix validation checks using truthy instead of !== true
- Add skipPrompts flag to skip module config prompts with --yes
- Add getDefaultModules() for automatic module selection with --yes
- Fix IDE selection to use array check instead of length check
Co-Authored-By: AiderDesk <https://github.com/hotovo/aider-desk>
---------
Co-authored-by: Brian <bmadcode@gmail.com>
The --prefer-offline flag causes npm to use cached package metadata,
which can be stale and fail to resolve recently published versions.
Also updates deprecated --production flag to --omit=dev.
Fixes#1438
* fix: trim activation header to avoid YAML formatting issues in kilo installer
* refactor: convert kilo installer to use YAML object serialization and add workflow support
- Replace string concatenation with yaml.parse/stringify for proper YAML handling
- Add workflow command generation and export to .kilocode/workflows/
- Implement clearBmadWorkflows to remove old BMAD workflow files
- Convert createModeEntry to createModeObject returning structured objects
- Update cleanup to use YAML parsing for proper mode filtering
- Update installCustomAgentLauncher to use object-based config
* fix: add task and tool command generation to kilo installer
---------
Co-authored-by: Brian <bmadcode@gmail.com>
* fix: support CRLF line endings and add task/tool templates for all IDEs
* fix: preserve file extensions in IDE task/tool paths and update BMAD branding
* fix: double extension issue in wrapper filename generation
* fix: correct path handling and variable reference in task/tool command generator
* fix: change default BMAD folder name from 'bmad' to '_bmad' across all IDE components
* refactor: centralize BMAD_FOLDER_NAME constant in path-utils
* fix: Replace the rest of BMAD_FOLDER magic values
* fix: add safety checks for setBmadFolderName method calls in IdeManager
* fix: convert absolute paths to relative in task-tool-command-generator
* fix: support .xml task files in bmad-artifacts task discovery
* fix: skip internal tasks in manifest generation and IDE command discovery
* fix: skip empty artifact_types targets and remove unused vscode_settings target
* fix: skip internal tools in manifest generation and improve Windows path handling in command generator
* fix: use csv-parse library for proper CSV handling in manifest generation
* refactor: extract CSV text cleaning to reusable method in manifest generator
* fix: normalize path separators to forward slashes in agent file copying for cross-platform compatibility
---------
Co-authored-by: Alex Verkhovsky <alexey.verkhovsky@gmail.com>
Co-authored-by: Brian <bmadcode@gmail.com>
Prevents Claude from auto-invoking BMad skills without explicit user
request. Adds disable-model-invocation: true frontmatter to all
command templates and inline generators for Claude Code and Codex.
Co-authored-by: Brian <bmadcode@gmail.com>
Comprehensive fix for installer failures related to Astro/Starlight peer dependencies:
1. Update @astrojs/starlight from 0.37.0 to 0.37.5 (latest stable)
2. Add .npmrc with legacy-peer-deps to prevent peer dependency warnings
3. Update module installer to use --legacy-peer-deps flag for external modules
This resolves issues where:
- npm shows peer dependency warnings that users interpret as failures
- External module installations fail due to strict peer dependency checking
- Different npm versions handle peer dependencies inconsistently
Technical note: Starlight 0.37.x requires astro@^5.5.0, which is compatible
with astro@5.16.0 (^5.5.0 means >=5.5.0 <6.0.0). The issue was npm's warning
display, not actual incompatibility.
Fixes: Installation errors reported in v6.0.0-Beta.2
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
* fix: correct malformed XML syntax and remove hardcoded path
- Fix missing opening quote in activation-steps.txt: `n={HELP_STEP}"` → `n="{HELP_STEP}"`
- Remove spurious hyphen: `-Let` → `Let`
- Replace hardcoded `/Users/brianmadison/...` path with relative path
Fixes#1435
* fix: add missing HELP_STEP placeholder replacement
The activation-steps.txt template includes a {HELP_STEP} placeholder,
but activation-builder.js never calculated or replaced it. This caused
the literal string "{HELP_STEP}" to appear in compiled agent files.
Added helpStep calculation between menuStep and haltStep, and adjusted
subsequent step numbers accordingly.
Fixes#1441
* Update src/bmm/workflows/2-plan-workflows/create-prd/validation-report-prd-workflow.md
---------
Co-authored-by: Alex Verkhovsky <alexey.verkhovsky@gmail.com>
Nikolai Zhirinas
Dicky Moore
Chris Chen
Alex Verkhovsky
Davor Racic
PinkyD
Brian Madison
Wendy Smoak
wison
Curtis Ide
Ankit Gupta
Brian Madison
Murat K Ozcan
Adam Biggs
jheyworth
Vladimir Hrusovsky
Drickon
Adam Biggs
Michael Pursifull