Address findings from adversarial review: clarify spec_file as path
variable (F4), add file list construction rule (F8), HALT on unparseable
diffs (F9), differentiate empty findings handling (F5), merge evidence
during dedup instead of dropping (F6), and fix NEXT step paths (F1).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Remove installed_path and unused intra-skill path variables from
workflow.md (PATH-02, PATH-04).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Remove installed_path and intra-skill path variables from
workflow.md (PATH-02, PATH-04).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Remove installed_path definition and intra-skill path variables
from workflow.md (PATH-02, PATH-04).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* chore: convert correct-course workflow to native skill
* fix(skill): patch correct-course native skill metadata
* fix(skill): inline hardcoded path variables in correct-course
Remove installed_path, checklist, and project_context variables that
just indirected single-use hardcoded paths. Use bare values inline.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
The code review workflow required finding 3-10 issues minimum per review
and forced the agent to keep looking if fewer than 3 were found. This
created an endless review cycle where every review manufactures issues
even after previous fixes were applied, because the workflow cannot
conclude with "no issues found."
Replace the hard minimum with a zero-issue sanity check that allows
clean reviews after a thorough re-examination, while preserving the
adversarial review approach for genuine issues.
* refactor(augment): remove legacy YAML/XML workflow rules from code review guidelines
All workflows have been converted to markdown. Remove workflow.yaml,
workflow.xml, and config_source references from Augment review rules.
Drop the entire xml_workflows section (5 rules) and the YAML-specific
standard_workflow_instructions rule.
* refactor: extract discover_inputs protocol from workflow.xml into co-located markdown
Convert the discover_inputs XML protocol (FULL_LOAD, SELECTIVE_LOAD,
INDEX_GUIDED strategies) into standalone markdown files placed alongside
the two workflows that use it (create-story, code-review). Replace
<invoke-protocol> tags with explicit file references. This decouples
the workflows from workflow.xml, enabling its deletion in a follow-up.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: delete dead YAML/XML workflow engine files
Remove 5 files made obsolete by the workflow.yaml → workflow.md migration:
- workflow.xml (the YAML workflow interpreter engine)
- dev-story/instructions.xml (superseded by workflow.md)
- 3 installer templates for YAML workflow command generation
References in CLI code will be cleaned up in follow-up commits.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: delete obsolete workflow handler fragments
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: remove YAML workflow code paths from CLI installer pipeline
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: remove workflow.xml references from manifests and checklists
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* docs: remove workflow.xml references from English command docs
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* test: update fixtures to remove workflow.yaml references
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: update workflow.yaml example path to workflow.md in handler-multi
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: stop tracking workflow/validate-workflow as handler attributes
These handler fragments were deleted — the exec handler already covers
loading .md workflow files directly.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: rename workflow attribute to exec in agent menu items
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: address PR review findings from triage
- Fix regex capture group index in module manager workflow path parsing
- Remove stale workflow handler references from handler-multi.txt
- Replace workflow with multi in activation-steps dispatch contract
- Remove dead validate-workflow emission from compiler and xml-builder
- Align commands.md wording to remove engine references
- Fix relativePath anchoring in _base-ide.js recursive directory scans
- Remove dead code from workflow-command-generator (unused template,
generateCommandContent, writeColonArtifacts, writeDashArtifacts)
- Delete unused workflow-commander.md template
- Add regression test for workflow path regex
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* refactor: convert create-story workflow.yaml to workflow.md (step 7)
Merge workflow.yaml config and instructions.xml execution logic into a
single self-contained workflow.md. Drop engine scaffolding directives,
preserve all behavioral constraints. Update checklist.md references.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: update remaining workflow.yaml refs to workflow.md
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* chore: convert dev-story workflow from yaml to markdown format
Merge workflow.yaml config and instructions.xml content into a single
workflow.md, following the established conversion pattern. Drop engine
scaffolding directives, preserve all behavioral constraints verbatim.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: update dev-story workflow references from .yaml to .md
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* chore: convert code-review workflow.yaml to workflow.md
Step 6 of 9 in yaml-to-md conversion plan. Merges workflow.yaml
config and instructions.xml content into a single workflow.md
following the established conversion pattern. Updates agent yaml
and module-help.csv references.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: escape folder names with backticks to fix markdownlint MD037
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Step 5 of 9 in yaml-to-md conversion plan. Merges workflow.yaml config
(6 input_file_patterns including INDEX_GUIDED) and instructions.md
execution logic into a single self-contained workflow.md. Updates
references in sm.agent.yaml, pm.agent.yaml, module-help.csv, and
checklist.md. Deletes workflow.yaml and instructions.md.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* chore(sprint-planning): convert workflow.yaml + instructions.md to unified workflow.md
Step 4 of 9 in the yaml-to-md conversion plan. Merges config
and instructions into a single self-contained workflow.md,
dropping engine scaffolding (critical tags, invoke-protocol).
* fix(sprint-planning): address review findings from PR triage
- Update stale workflow.yaml references to workflow.md in sm.agent.yaml and module-help.csv
- Widen epics_pattern from epic*.md to *epic*.md to match documented input files
- Fix placeholder mismatch: epics_in_progress_count → in_progress_count
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* refactor(sprint-status): convert workflow.yaml + instructions.md to single workflow.md
Merge workflow config and instruction content into a unified workflow.md
with YAML frontmatter, following the established convention for converted
workflows. Update module-help.csv reference accordingly.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix(sprint-status): restore no-time-estimates rule dropped during conversion
The <critical> preamble removal incorrectly classified this behavioral
rule as boilerplate. It is an actual output constraint.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* test: add comprehensive workflow conversion test results
- 14 test fixtures covering data and validate modes
- Tested across Opus, Sonnet, and Haiku models
- OLD format (yaml+md) vs NEW format (workflow.md)
- Confirms zero regressions in conversion
- Includes reproduction instructions for future sessions
* fix(sprint-status): consolidate no-time-estimates into role line
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor(qa-generate-e2e-tests): convert workflow.yaml + instructions.md to single workflow.md
Task 2 of yaml-to-md conversion plan. Merges config variables into
INITIALIZATION section, inlines instructions into EXECUTION section.
Drops non-consumed yaml keys (required_tools, tags, execution_hints).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor(retrospective): convert workflow.yaml + instructions.md to single workflow.md
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: update workflow.yaml references to workflow.md for converted workflows
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* chore: remove test results file from version control
SPRINT_STATUS_CONVERSION_TEST_RESULTS.md contains hardcoded local
filesystem paths and is a session-specific test artifact. Added to
.bare/info/exclude to keep it ignored across all worktrees.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* feat(skills): add canonical bmad- naming via skill manifests
Add bmad-skill-manifest.yaml sidecars to all 38 capabilities (tasks,
agents, workflows) declaring canonicalId as the single source of truth
for skill names. Update Claude Code and Codex installers to prefer
canonicalId over path-derived names, with graceful fallback.
- 24 manifest files covering 38 capabilities
- New shared skill-manifest.js utility for manifest loading
- resolveSkillName() in path-utils.js bridges manifest → installer
- All command generators propagate canonicalId through CSV manifests
- Drops bmm module prefix from all user-facing skill names
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat(skills): claude-code installer outputs .claude/skills/<name>/SKILL.md
Refactor the config-driven installer to emit Agent Skills Open Standard
format for Claude Code: directory-per-skill with SKILL.md entrypoint,
unquoted YAML frontmatter, and full canonical names.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* refactor(installer): migrate codex to config-driven pipeline
Delete the custom codex.js installer (441 lines) and route Codex
through the config-driven pipeline via platform-codes.yaml. This
fixes 7 task/tool descriptions that were generic due to bypassing
manifests, and eliminates duplicate transformToSkillFormat code.
Key changes:
- Add codex entry to platform-codes.yaml with skill_format + legacy_targets
- Remove codex from custom installer list in manager.js
- Add installCustomAgentLauncher() to config-driven for custom agent support
- Add detect() override for skill_format platforms (bmad-prefix check)
- Set configDir from target_dir for base-class detect() compatibility
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix(installer): guard codex skill installs in nested directories
* fix(installer): warn on stale global legacy skill dirs
* feat(installer): migrate cursor to native skills
* Migrate Windsurf installer to native skills
* Clarify Windsurf skill invocation in checklist
* feat(installer): migrate kiro to native skills
* docs: record kiro skill visibility verification
* Migrate Antigravity installer to native skills
* Document Antigravity ancestor skill verification
* Synchronize native skills migration checklist
* Migrate Auggie installer to native skills
* Migrate OpenCode installer to native skills
* Document live skill verification for Auggie and OpenCode
* fix(test): replace _bmad filesystem dependency with self-contained fixture
The installation component tests walked up the filesystem looking for a
pre-installed _bmad directory, which exists locally but not in CI. Replace
findInstalledBmadDir() with createTestBmadFixture() that creates a minimal
temp directory with fake compiled agents, making tests fully self-contained.
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: Brian <bmadcode@gmail.com>
The staleness warning in sprint-status always fired after 7 days because
it checked the 'generated' timestamp, which is only set once during
sprint-planning. Other workflows (dev-story, create-story, code-review,
retrospective) update statuses but never touched 'generated'.
This adds a 'last_updated' field that is:
- Set initially alongside 'generated' during sprint-planning
- Bumped to current date by every workflow that modifies sprint-status.yaml
- Used by the staleness check (with fallback to 'generated' for backward
compatibility)
Fixesbmad-code-org/BMAD-METHOD#1820
Co-authored-by: Oz <oz-agent@warp.dev>
- Standardize all workflow descriptions to follow format: [short description]. Use when the user says 'explicit action phrase' or 'another phrase'
- Remove verbose descriptions in favor of concise summaries with explicit trigger phrases
- Use max 2 phrases per workflow to minimize context and false positives
- Phrases are explicit actions (e.g., "lets create", "run X") not questions
- No slash commands in descriptions - users invoke via /name directly
- Rename qa/automate to qa-generate-e2e-tests for clarity
- Update various core tasks and workflows
- create-architecture/workflow.md: fix installed_path dir name
from 'architecture' to 'create-architecture'
- create-story/checklist.md: fix 2 refs from validate-workflow.xml
to workflow.xml (file does not exist with validate- prefix)
- package.json: add --strict to validate:refs so broken references
fail CI instead of logging warnings and exiting 0
Co-authored-by: Brian <bmadcode@gmail.com>
* fix: remove output_folder/story_dir aliases, flatten variables sections (#1602)
Drop pointless alias variables (output_folder, story_dir, story_directory)
from Phase 4, Quick Flow, and QA workflows. Replace all references with
the canonical {implementation_artifacts} or {planning_artifacts} variables.
Also flatten unnecessary `variables:` YAML nesting in all affected
workflow.yaml files — the workflow engine treats all keys as top-level,
so the nesting added complexity with no semantic value.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: add missing config declarations, remove remaining aliases and dead variables
- Add missing document_output_language and user_skill_level to create-story
(referenced in instructions.xml but never declared)
- Remove retrospectives_folder alias, replace with canonical implementation_artifacts
- Remove unused sprint_status and duplicate validation alias from correct-course
- Remove unused date, planning_artifacts, tracking_system from sprint-status
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: address PR review findings and rename shadowed output_folder variable
- Fix single/double brace mismatch for {implementation_artifacts} in
create-story instructions.xml (F1)
- Remove escaped asterisks in glob patterns in retrospective
instructions.md (F2)
- Eliminate redundant {config_source} re-resolution for story_location
in sprint-planning workflow.yaml (F5)
- Add explicit instruction to discover previous_story_num by scanning
artifacts instead of leaving it undefined (#7)
- Rename output_folder to project_knowledge in document-project
workflows to stop shadowing the canonical core config variable (#13)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: use plural retrospectives in previous retro search instructions
The glob pattern can match multiple retrospective files for the same
epic (e.g., partial mid-sprint retro and full completion retro). Use
plural "retrospectives" to make clear the LLM should load all matches.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* fix(bmm): add missing project-context references to workflows
correct-course, retrospective, and sprint-status workflows were missing
project_context entirely. quick-spec referenced it in step files but not
in the initialization sequence.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix(bmm): add explicit project-context load instructions to workflows
Add Load project_context if exists action to instruction files for
correct-course, retrospective, sprint-status, and sprint-planning.
The workflow.yaml declarations alone do not cause the file to be loaded;
the instruction files must explicitly reference it.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Replace ambiguous "execute" terminology with explicit "Read fully and follow:"
phrasing across all workflow files to prevent LLM goal-seeking behavior where
models attempt to "achieve the end result" rather than following step-by-step
instructions verbatim.
Changes:
- Update 5 handler templates with canonical phrasing
- Replace ~150 INSTRUCTIONAL patterns across 87 workflow files
- Add "[Workflow] complete." prefix to 7 workflow endpoints
- Preserve BEHAVIORAL/STRUCTURAL patterns (agent descriptions, XML tags)
- Fix gitignore and markdownlint to ignore all node_modules directories
Closes#1372
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
The correct-course workflow restructures epics but did not update
sprint-status.yaml, leaving tracking out of sync. Added check-item 6.4
to Section 6 (after user approval) to update sprint-status.yaml when
epics are added, removed, renumbered, or stories are modified.
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
Alex Verkhovsky
Nikolas Hor
Chandan Veerabhadrappa
Brian Madison
Brian Madison
Murat K Ozcan