fix(bmm): address automation-mode review comments on quick-dev/code-review

Resolves the augmentcode review findings on PR #2494, tightening the
BMAD_AUTO_MODE contract so unattended runs behave consistently:

- code-review automation-mode.md: harmonize the result.json `clean`
  definition with rule 8 (zero actionable findings AND spec status
  set to `done`), and correct the `dismissed` count description
  (recorded to the Review Ledger, not dropped).
- code-review step-04 §1: the clean shortcut now keys off actionable
  findings only and, in auto mode, still writes the Review Ledger when
  findings were dismissed before jumping to §6 — otherwise set-aside
  dismissals never reach the ledger and the next cycle re-litigates them.
- code-review: give explicit relative paths to bmad-quick-dev's
  deferred-work-format.md (rule 7 and step-04) so unattended agents can
  locate it.
- code-review step-01: ground the auto-mode note in rule 1 (no HALT
  anywhere in the step) instead of enumerating a partial skip list.
- quick-dev deferred-work-format.md: drop the dead
  `bmad-auto-sweep/migration-mode.md` reference (that file ships with the
  orchestrator, not BMAD-METHOD); describe the sweep migration as an
  external orchestrator-side process.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

src/bmm-skills/4-implementation/bmad-code-review/automation-mode.md

@@ -17,10 +17,10 @@ this workflow.
   ```json
   {
     "workflow": "code-review",
-    "clean": <true when zero unresolved decision-needed/patch findings remain>,
+    "clean": <true only when zero actionable findings remain AND you set the spec status to "done" on disk — see rule 8>,
     "patched": <count of patch findings applied this session>,
     "deferred": <count of defer findings appended to deferred-work>,
-    "dismissed": <count dropped as noise>,
+    "dismissed": <count dismissed as noise — recorded to the Review Ledger, not dropped>,
     "escalations": [{"type": "<kind>", "severity": "CRITICAL|PREFERENCE",
                      "detail": "<one or two sentences>"}]
   }
@@ -67,7 +67,7 @@ this workflow.
 7. **Act** (step-04): write findings to the spec file as usual; apply EVERY
    `patch` finding without asking; append `defer` findings to the
    deferred-work file following the format in the sibling `bmad-quick-dev`
-   skill's `deferred-work-format.md` (same directory conventions);
+   skill's deferred-work format file at `../bmad-quick-dev/deferred-work-format.md`;
    skip the "Next steps" menu entirely.
 8. **Status updates** (step-04 section 6) run exactly as written: spec
    status (frontmatter `status:`) and sprint-status sync.

src/bmm-skills/4-implementation/bmad-code-review/steps/step-01-gather-context.md

@@ -12,7 +12,7 @@ story_key: '' # set at runtime when discovered from sprint status
 - YOU MUST ALWAYS SPEAK OUTPUT in your Agent communication style with the config `{communication_language}`
 - The prompt that triggered this workflow IS the intent — not a hint.
 - Do not modify any files. This step is read-only.
-- If `{auto_mode}`: the invocation argument is the spec file. Apply automation-mode.md rule 2 (target/baseline/story-key), rule 3 (diff source), and rule 4 (no chunk question), then skip instruction 6's question and the CHECKPOINT — go straight to NEXT.
+- If `{auto_mode}`: do NOT HALT or ask anywhere in this step (automation-mode.md rule 1). The invocation argument is the spec file — apply rule 2 (target/baseline/story-key; this skips the instruction-1 cascade and instruction 2's ask), rule 3 (diff source), and rule 4 (no chunk question); skip instruction 4's spec-context question, instruction 6's question, and the CHECKPOINT — go straight to NEXT.
 
 ## INSTRUCTIONS
 

src/bmm-skills/4-implementation/bmad-code-review/steps/step-04-present.md

@@ -24,7 +24,9 @@ If `{auto_mode}`, run this step with these substitutions (see automation-mode.md
 
 ### 1. Clean review shortcut
 
-If zero findings remain after triage (all dismissed or none raised): state that and proceed to section 6 (Sprint Status Update).
+If no **actionable** findings remain after triage — no `decision-needed`, `patch`, or `defer` findings (every finding was dismissed, or none were raised): state that and proceed to section 6 (Sprint Status Update). Set-aside dismissed findings do not count as "remaining".
+
+**If `{auto_mode}`:** when any findings were dismissed, do NOT skip straight to section 6 — first perform section 2's Review Ledger append (the `#### Review Ledger ({date})` subsection) so the next cycle's reviewers do not re-litigate them, then proceed to section 6.
 
 ### 2. Write findings to the story file
 
@@ -41,7 +43,7 @@ If `{spec_file}` exists and contains a Tasks/Subtasks section, append a `### Rev
 
 Also append each `defer` finding to `{deferred_work_file}` under a heading `## Deferred from: code review ({date})`. If `{spec_file}` is set, include its basename in the heading (e.g., `code review of story-3.3 (2026-03-18)`). One bullet per finding with description.
 
-**If `{auto_mode}`:** instead of the heading-based append above, append each `defer` finding to `{deferred_work_file}` as a `DW-<seq>` entry following the format and dedupe rule in the sibling `bmad-quick-dev` skill's `deferred-work-format.md`. Use `origin: code review of <spec basename>, {date}`, and set the entry's `severity:` from the finding's own severity. Then append a `#### Review Ledger ({date})` subsection to `{spec_file}` recording every triaged finding on one line each — `<verdict>: <title> [<location>] — <one-line reason>` — including the dismissed ones set aside in step-03. The ledger is append-only across review cycles; it is what stops the next cycle's fresh reviewers from re-litigating findings that were already adjudicated.
+**If `{auto_mode}`:** instead of the heading-based append above, append each `defer` finding to `{deferred_work_file}` as a `DW-<seq>` entry following the format and dedupe rule in the sibling `bmad-quick-dev` skill's deferred-work format file at `../../bmad-quick-dev/deferred-work-format.md`. Use `origin: code review of <spec basename>, {date}`, and set the entry's `severity:` from the finding's own severity. Then append a `#### Review Ledger ({date})` subsection to `{spec_file}` recording every triaged finding on one line each — `<verdict>: <title> [<location>] — <one-line reason>` — including the dismissed ones set aside in step-03. The ledger is append-only across review cycles; it is what stops the next cycle's fresh reviewers from re-litigating findings that were already adjudicated.
 
 ### 3. Present summary
 

src/bmm-skills/4-implementation/bmad-quick-dev/deferred-work-format.md

@@ -5,9 +5,9 @@ Used (in `bmad-auto` automation mode) by bmad-quick-dev (multi-goal splits,
 token splits, review defers) and bmad-code-review (defer findings). The file is
 append-only — never rewrite or delete existing entries. (One exception: freeform
 pre-DW-format content from older projects is rewritten wholesale into canonical
-entries by a `bmad-auto sweep` migration session — see
+entries by a `bmad-auto sweep` migration run — an orchestrator-side process
-`bmad-auto-sweep/migration-mode.md`; the TUI displays such legacy items
+external to this skill; the TUI displays such legacy items read-only until that
-read-only until that happens.)
+happens.)
 
 ## Before appending: dedupe check